[ ],[ ]
Van Avtivity
equipment    
[ ],[ ],[ ],[VID],[ ],[ ]
Velocity and Position
Scooters (1)
Tickers and Tickertapes with carbons (1)
Rulers (1)
Graph Paper (1)		    
Graphing Motion (VER) Calculators TI-83 (1)
Motion Sensors (1)
Metersticks (1)
Labpro (1)
    
[ ],[ ],[ ],[ ]
Graphing Motion (PAS)
Explorer GLX (1)
PASCO Motion Sensors (1)
Metersticks (1)
    
[ ],[ ]
Newton's 2nd Law (VER)
1 m track (1) or (2)
Pasco cart (1)  (and bar masses (2))
Fan Accessory (1)
Motion Sensor (1)
Ti-83 Calculators (1)
Scale - Balance (2 / class)
Labpro (1)
Metal slugs (2)
AA batteries (2-3)

    
Newton's 2nd Law (PAS) 1 m track (1)
Pasco cart (1)  (and bar masses (2))
Fan Accessory (1)
Pasco Motion Sensor (1)
Explorer GLX (1)
Scale - Balance (2 / class)
Metal slugs (2)
AA batteries (2-3)		    
[ ],[ ]
Friction
Bricks (2)  -- (about 20 per class)
Tile (1), Rug (1) 
Spring Scales – 30 N scale (1) and 50 N scale (1)
   
Newton's 3rd Law (VER) # per group

Bathroom Scales (1)
Scooters (1)
 Yellow pads

Optional section:
Force Probes (2)  (need both hooks and bumpers + the cart adapters)
Pasco Carts (2)
Labpro (1)
1 m tracks (1)
TI 83 calculators (1)
Phillips head screw driver (1 for class)
30 N spring scales (1)
mass set (1)
    
[ ],[ ]
Newton's 3rd Law (PAS)
# per group

Bathroom Scales (1)
Scooters (1)


Optional section:
Pasco Force Probes (2)  (need bumpers)
Pasco Carts (2)
Explorer GLX (1)
1 m tracks (1)
Phillips head screw driver (1 for class)
mass set (1)		    
[ ],[ ]
Balancing
Dowel (short) (1)
Clay (bunch)
Meterstick (1)
Square Nuts (50)
    
[ ],[ ],[ ],[ ]
Geometric Optics (mirrors)
raybox and mask (1)
Graph paper (5 sheets)
Plane mirror (1)
Protractor (1)
Mirror clip (1)
Rulers (1)
    
[ ],[ ]
Geometric Optics (lenses)
Ray box with mask of different slits (1)
Set of mirrors/lenses for the ray box (1)
Double convex lens (1)
Plastic lens holders (1)
Wooden lens holder (1)
Whiteboard (large) (1)
Metersticks (1)
Long filament bulbs and sockets (1)
Graph paper (2)

    
[ ],[ ]
Wave Properties of Light
wood Barriers (2)
projector ripple tanks (1)
Dowel (1)
Water
Laser and Tripod (1)
Transparencies and papers with sine waves (2)
Glass with slits (1)
Plastic holders (1)


    
[ ],[ ]
Mecahnical Waves
Large Spring (1)
Paper clips
stopwatches
long tape measures (5 per class)
ringstand

    
[ ],[ ]
Charge
Scotch Tape (1)
Ringstands (1)
Wooden dowels (1)
rubber rods (1)
fur (1)
Metal Pith Balls (1)
Rt. Angle clamps (1)
    
[ ],[ ]
Current
Basic Circuits Kit (includes 2 batteries, 5 alligator clip wires, 5 bulbs, 2 sockets, switch) (1)  (1) Kit with bare wires, bulbs (1)    
[ ],[ ]
Voltage
Basic Circuits Kit (contains 2 batteries with holders, 2 sockets, 5 bulbs, 1 switch, 5 aligator wires) (1)
Resistors (various  – in a glad Tupperware.)
Extra Batteries (2 additional)
Multimeters (1)		    
[ ],[ ]
Magnetism
Various Objects (bunch – foam, wood, paper clips, metal) 
Small rectangular Magnets (2 or 3)
Metal pith balls (1)
Battery with holders (1)
Bare wire – in Glad Tupperware (3 pieces ~ 5 cm)
Switch (1)
Wires with Alligator Clips (4)
Compasses (1 to 4) –small
rubber rod and fur (1)
Masking tape or scotch tape (1)		    
[ ],[ ]
Magnets and Motors
small disc magnet that comes with the motor (1)
Cow magnets (1)
Swing apparatus (1)
Battery (2)
Switch (1)
Ringstand (1)
Small Compasses (3)
Simple motor (1)
Alligator clips (4)
Right angle clamp (1)
MagnaProbe (1)		    
[ ],[ ]
Heat and Temperature
hot pate (3)
temp probes (1)
labpro (1)
Styrofoam cups (4)
Glass beakers – 900 ml (3 for class)
Plastic graduated cylinder 250 ml (2)		    
Hooke's Law (VER) large helical spring (1)
mass set (1)
force probe (1)
force probe rod adapter (1)
motion sensor (1)
labpro (1)
ringstand (1)
ruler (1)
metersticks (1)
 calculator (1)
 right angle clamps (1)
 wire cage for motion sensor (1)
    
[ ],[ ]
Hooke's Law (PAS)
large helical spring (1)
mass set (1)
PASCO force probe (1)
force probe rod adapter (1)
PASCO motion sensor (1)
Explorer GLX (1)
ringstand (1)
ruler (1)
metersticks (1)
 right angle clamps (1)
 wire cage for motion sensor (1)
    
[ ],[ ]
Capacitors (VER)
capacitors – 1F (1)
Basic Circuits Kit (1)
LabPro (1)
Voltage Probe (1 set)
Multimeters (1)  (2 if you have)
60-70 W resistor (1)
4-5 W resistors (1)
stopwatch (1)
graph paper 		    
Capacitors (PAS) capacitors – 1F (1)
Basic Circuits Kit (1)
Explorer GLX (1)
Voltage Probe (1 set)
Multimeters (1)  (2 if you have)
60-70 W resistor (1)
4-5 W resistors (1)
stopwatch (or use the stopwatch feature on the Explorer GLX) (1)
graph paper
   
Light and Shadow maglites (2)
masks with triangle and circle (manila folder) (1)
box with graph paper screen and – clay ball for shadow experiment (1)
colored filters (red and green transparency) (2)
masking tape
metersticks or rulers (1)
long filament bulbs (straight filament and sockets (1)

optional
for trying other holes – need -
hole punchers (couple / class)
    
Superconductivity superconducting material (1)
petri dish (1)
liquid nitrogen (5 L for multiple classes)
small magnet (superconducting kit) (1)
gloves (2 sets per group)
tweezers (1)
goggles (1 per student)
magnetic motor coils (or coil of wire) (1)

big neodymium magnets (1)
wires with alligator clips (2)
   
Pressure and Volume Ti-83 plus calculator (1)
LabPro (1)
Vernier Pressure Gauge (1)
Plastic syringe (1)
   
Volume and Density set of four density cubes (all same size and shape)  -- use the orange, yellow, light gray and dark gray cubes (1)
Plastic Graduated cylinder (250 mL) (1)
thin string (spool for class)
Collection of various materials.(for mystery objects)


1 class Electronic scale (1 for class)
Water bucket (1 for class)
    
Sound (VER) Set of eight tuning forks (1 set)
TI 83 calculators (1)
Lab Pros (1)
Vernier Microphone (1)
2 meterstick (1)


Open speakers (2 per class)
Function Generators (2 per class) w/ cords